Baseboard & Wall at Baseboard level
If your baseboard vents are at the lower wall resting upon the floor &/or between the baseboard molding or if you have Triangular shaped Baseboard heater covers or Air Returns then you are at the right place.
We can make most any thing to fit your situation or we can figure it out together. Just let me know the duct opening size, the overall size to fit and we will get you a quote.
Crafted from Solid Woods, our baseboard vents are made to stand up to generations of use. Because of the way our vents are constructed, they are popular for restoration projects in historic, victorian era and even modern homes, where the detail and quality of every feature is extremely important. At the same time, our vents have a timeless quality that makes them ideal for new or modern homes as well.
We have made up to 22 feet in lengths on these type vents. Typically we will specify the Louvered Style in these as the louvers can be placed parallel with the floor and slanting downwards so that (unless you are a mouse) floor traffic does not see into the opening area.
However, the Grate Style (some call eggcrate or boat decking with the square design) looks great as well. In these situations with Wall at baseboard supply vents or air returns or triangular baseboard heater covers we usually go with a smaller grid size. With a 5/8″ open square surrounded by 1/4″ solid grid this looks beautiful with smaller and many more little squares.
We can make most any size, so just give us a call, email or fax and we will get you a quote as soon as possible.
Triangular Baseboard Registers, Baseboard Vents and Air Returns:
These Baseboard Vents are crafted from many of our solid woods, choose either with Genuine Red Oak, White Oak, Ash, Maple, Mahogany, 3 Pines, 2 Cherry’s, Hickory, Walnut or you may even supply the stock to match exactly your project. They are left unstained so that they will match your decor. Staining and installation is simple, we are happy to get you instructions or walk you through any questions.
With our recessed fastening system, there are no visible screws or fasteners in your Baseboard vent. Baseboard Heater Covers fit on the floor against the wall, baseboard molding or cabinets. The ends are triangular to fit up against whatever you have.
They are found primarily in older Victorian Era homes, but they are the “new wave” in high end homes today. Baseboard Vents really bring out the beauty of your hardwood or laminate floor.
Measurements on Baseboard heater covers are a little different. Give us your duct opening as well as any requirements for the overall size you need, in case you want to cover up or fit within the confines of your existing baseboard cutouts or cabinet etc. Therefore, for example, in the check out below, you will see the duct opening size of up to a 2 or 2.25″ by 16 with an overall size of 18″ wide x 4″ high.
Below, you can check out for many sizes however if you need something else, just give us a call, email, or fax. We are happy to give you a call as well.
|2x10 with overall size 12" wide||$29.95|
|2x12 with overall size 14" wide||$29.95|
|2x14 with overall size 16" wide||$39.95|
|2x16 with overall size 18" wide||$39.95|
|2x18 with overall size 20" wide||$49.95|
|2x20 with overall size 22" wide||$49.95|
|2x22 with overall size 24" wide||$59.95|
|up to 2.25×10-Overall 4"h X 12″ w||$29.95|
|up to 2.25×12-Overall 4"h X 14″ w||$29.95|
|up to 2.25×16-Overall 4"h X 18″ w||$29.95|
|up to 2.25×18-Overall 4"h X 20″ w||$39.95|
|up to 2.25×22 Overall 4"h x 24″ w||$49.95|
For Custom Sizes heights, depth at base or widths just give us a call, email or fax.
The one below, is an 18″ wide x 7″ high with louvers parallel with the floor and with wide spacing.