Laser Design Vents
We have a new line this year in our Laser Design Vents. They are made in Oak, Maple or Cherry wood cut with Lasers. Lasers cut a very fine line to cutout the pattern in the wood. The wood is only 1/4″ thickness so you use them in any non-loadbearing situation like walls, ceilings, cabinetry, doors, triangular baseboard vents, refrigerators, toekicks and others.
We have many designs, some of which you can see below.
Laser Design measurements are a little different than the other vents, in that these are 1/4″ in thickness so we just need the Overall size you need to not only cover the duct opening but also to fit into your space, maybe to cover the old paint lines or gouges or scrapes in the wall made by the old metal vents.
Design P, Cross and Star of David
Design A, Square within a Square
Design B, Cross and Starburst
Design C, Cross within a Circle
Design D, Effulgence from a point
Design E, Flowers and circles
Design F, Flower within a Circle
Design G, Lollipop
Design H, Concentric Circles
Just pick out your style, give us your Overall Size (we will get with you on the duct opening or air flow size you need), if you want screw holes, the wood choice and give us an email, call or fax
We are open til 9:00 pm central time weekdays and til 4:00 pm on Saturdays.
Our email is firstname.lastname@example.org
Our Phone numbers are either 800-232-8353 or 800-280-9464
these above numbers are also accessible through Skype if you are international.
The Fax is 888-468-0239