Select Page

Cabinetry – Custom Quote

  • Custom Size Vent Request

    In order for us to provide the perfect product for you, please complete  the following information below.
    Don't Forget to Measure TWICE for Accuracy!
     

    If You Have any of the Below Mentioned Standard Size & Symmetrical Fits for RETURN WALL & CEILING VENTS, You Can BUY NOW by Clicking Here!

    *WILL THIS BE PAINTED OR STAINED

    *CHOOSE STAINABLE WOOD TYPE

    *CHOOSE PAINTABLE WOOD OPTION

     

    If you are painting your vent, we recommend Birch, as it is the BEST and most resistant to temperature changes, heat, and condensation over time.

    *VENT FIT

     

    Our Self-Rimming fit will have a standard 7/8" lip on all 4 sides unless a different overall size has been specified by you. A 4 x 10" duct opening size, will have an Overall size of 5.75 x 11.75".

    Our Surface/Flush Mount will have a solid 1/2" border on each of the 4 sides, unless otherwise specified by you. A 4 x 10" duct opening size, will have an overall size of 5 x 11".

    *SURFACE THICKNESS

    We make these flush to fit within your space. Please tell us the surface thickness here.

    *NEED COUNTERSINK SCREW HOLES?

    Countersink Screw Holes can be added if your lip/flange has a minimum of 7/8". This pre-drilled hole allows your screw to lay flush within your vent piece.

    *VENT DESIGN / STYLE

    *DUCT OPENING or CUTOUT SIZE

    This measurement tells us the size needed to nest into that duct opening, as well as the air flow size.

    *OVERALL SIZE NEEDED

    If you do not have a specified Overall size needed, type N/A. If you have limitations on your total size, tell us here.

    *Is Your Fit Symmetrical or Asymmetrical?

    *ASYMMETRICAL OVERALL SIZE ALLOWANCE

    If this does not apply to your situation, type N/A. For those that have a restricted fit due to flooring, doors, molding etc., please tell us your size limitations needed for the Left, Right, Top and Bottom in INCHES.

    For ex. 3" top, 0" bottom, 2" left, 1" right

    *PREFER A DAMPER?

    If you prefer a damper to control the air flow, please let us know.

    VENT LOCATION

    *CHOOSE STAIN OPTION

    ALL VENTS are Purchased UNFINISHED, Unless You Request Staining.

    If you need us to stain this piece for you, we will use any of the Minwax Oil Based Stains with a 4 way sprayer to get into all those little crevices, with 2 coats front and 1 coat back.

    *CHOOSE STAIN FINISH

    *NEED PRIME PAINT SERVICES?

    *Need a Top Coat Paint?

    *Top Coat Paint Finish

    ANY ADDITIONAL NOTES/QUESTIONS/CONCERNS?

    OPTIONAL PHOTO UPLOAD PART 1

    If you need to communicate with photos for your situation, or help identifying your wood species, etc., you may upload here.

    OPTIONAL PHOTO UPLOAD PART 2

Fill out our quote form, and we will get you a personalized quote within 1 business day. All quote requests are typically answered SAME DAY!

If you are unsure of your wood species, vent fit options, etc. there is a section at the bottom you can attach any notes or upload photos regarding your needs.

Our staff will walk you through each step! Remember ALL SIZES go by DUCT OPENING size, as your vent will have to nest/fit within this opening.

More Detailed Information Can Be Found In Our Learning Center.

 

How Do I Order/Request a Quote?

Let's begin with your DUCT OPENING SIZE! This measurement tells us the size to nest into your duct opening for a secured fit, as well as the air flow size.

All sizes are ordered by the DUCT OPENING OR CUT OUT SIZE! Your Overall size will change depending on your chosen fit.

To Be Sure Of Accuracy...Don't Forget...We Want To Measure Twice!

You Will Need the Measurement of Your Duct Opening or Cutout Size (i.e. The Hole).

This Measurement Provides Us With Our Starting Point & Air Flow Size.

What's My Overall Size?

Your Overall size will be determined by your chosen fit option.

Our Standard Overall Size is as Follows:

  • Self-Rimming will have a 7/8" lip on each of the 4 sides, and rest proud of surface.

          For a 4 x 10" duct opening size, your Overall Size will be 5.75 x 11.75"

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

  • Surface / Flush Mount will have a 1/2" solid border on each of the 4 sides with straight edges, resting flush within your surface. Check your surface thickness at the time you place the order, as we make it the thickness you request.

          For a 4 x 10" duct opening size, your Overall size will be 5 x 11".

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

How Do I Select My Options?

  • First you will need to choose your wood. If you are matching to existing wood, you will want to choose that same wood so that the grain and stain appear similarly. If you do not know your wood species, that is okay too, just attach a photo or email us and we will help you find your wood species or the closest match.

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

This is due to the vent needing to match with your surrounding location.

  • After determining your Duct Opening Size and any Overall Size Allowance, you will need to choose your fit. Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that's smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

What's the difference in Vent FIT Options?

 

- Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that’s smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

Our Surface / Flush Mount will have straight edges and made to the thickness of your surface, with a 1/2" solid border on all 4 sides. Typically if your area was not already cut for this particular fit, you need a handy person to help you install. Modern day tools have made it much easier for the average person to be able to install these fits. We can walk you or your contractor through this installation process. Just send us a photo or contact us with your specific location fit information and we will help.

 

If you have any special fit issues such as Asymmetrical or against any obstruction such as a floor, door, molding, etc. we often accommodate these unique sizes. Just contact us through our Quote Page or directly with your situational needs.

Air Flow Concerns?

If you have ventilation or air flow concerns for this location, you will need to have your HVAC technician CONVERT your CFM's into FREE AIR AREA! If you can provide us with your Free Air Area needed and prefered design we can assist you in finding/designing a piece that most closely matches your needs. This would be a specialized need and we will need you to contact us through our Quote Page or directly to best assist you.

What is my Wood Species Type?

If you don't know your wood species, and you are Staining to match your existing wood, we are happy to help you determine your wood match. Simply select any wood on our chart, and add in the Notes & Photo Upload Option a Photo of the wood you are trying to match, and one of our representatives will assist with finding the match or closest match possible. Remember, we will need to make sure the wood grain matches, to help the stain absorb in a similar way.

Paintable Woods?

If you will be painting this vent to blend with your ceramic tile or marble flooring, you will want to choose from Birch, Maple, Pine or Poplar. Birch is the best as it is strong with tight pores and most resistant to humidity or temperature changes.

 

What Stain Color do I need?

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

 

This is due to the vent needing to match with your surrounding location.

We use any of the Minwax Oil Based Stains. These colors can also be found at your local hardware stores. If you like, you can also mail a small sample of the wood you are matching for us to use as a stain match.

Still Unsure of Anything?

If you are unsure of anything, rest assured we have an added Notes and 2 Optional Photo Upload sections at the end of your quote request. This allows you to communicate things regarding your fit, location, etc. One of our representatives will review your notes, and address them in your quote if needed.