Select Page

Cabinetry Vents

From: $29.95

  • Each Vent is Made Just For You!

    While these are Standard Sizes, each Wooden Vent has been Cut and Handcrafted per the specifications you give us below.

    ALL PIECES ARE UNFINISHED UNLESS YOU REQUEST STAINING OR PAINTING SERVICES!

    For commonly asked questions see our Description box at the bottom of this page.


    Now, Let's Get Started Building Your Vent!

     


    *Will This Be Painted Or Stained?

    *Select Stainable Wood

    We carry over 2 dozen species of wood to help match to your wood. It is important to match the grain and species for your stain to absorb similarly. If you are unsure of your species, you can attach a photo at the end, and we will assist you.

    *Select Paintable Wood

    If you are going to be painting your wood, we offer Birch, Maple, Pine or Poplar.

    Birch is the best as it is most resistant to humidity and temperature changes.

    *Vent Fit

    *Need Countersink Screw Holes

    Countersink Screw Holes are pre-drilled holes to allow your screw to lay more flush with the vent.

    *Surface Thickness

    For Non-Standard Surface Thickness There is a $3.00 additional customization fee.

    *Duct Opening or Cut Out Size for Self-Rimming Vent

    Here we will refer to your Duct Opening Size as the ID Size.

    The Overall Size will be referred to as the OD size.

    Ex. If you have a 4 x 12" duct opening size,  the back of your vent will nest into your duct opening with this air flow size. Your Overall size of the vent will have a 7/8" lip/flange on each side, giving you an Overall size for your vent of 5.75 x 13.75".

    *Duct Opening Size for Surface/Flush Mount Vent

    Here the Duct Opening Size will be referred here to as the ID Size.

    The Overall Size will be referred to here as the OD Size.

    If you have a 4 x 12" duct opening size, the back of this vent will have a rabbeted edge on the back allowing it to nest securely into your duct opening, as well as allowing for the 4 x 12" air flow. There will be a 1/2" solid border on each side, giving your Overall vent size of 5 x 13".

    *Vent Design

    *Vent Location

    *HVAC type?

    *Need a Damper for $6.95 ea. ?

     

    For Supply Vents We Have Damper Add-on Options in Select Sizes

     

    *Need a Damper for $12.95 ea. ?

     

    For Supply Vents We Have Damper Add-on Options in Select Sizes

    *Need a Damper for $14.95 ea. ?

     

    For Supply Vents We Have Damper Add-on Options in Select Sizes

    *Need a Damper for $16.95 ea. ?

     

    For Supply Vents We Have Damper Add-on Options in Select Sizes

    *Need a Damper for $19.95 ea. ?

     

    For Supply Vents We Have Damper Add-on Options in Select Sizes

    Do You Need Us To Stain This For You?

    If you need us to stain for you using any of the MINWAX OIL BASED STAINS, we will use a 4 way sprayer getting into all those little crevices, to include 2 coats on the front side, and 1 coat on the back side.

    *Minwax Oil Based Stain Option for $8.95 ea.

    *Minwax Oil Based Stain Option for $19.95 ea.

    *Select Finish/Sheen

    *Would You Like Us to Prime Paint For You?

    If you would like us to add Prime Painting, we have White or Black prime paint colors. We will use a 4 way Sprayer to get into ll those little crevices with 2 coats on the front side and 1 coat on the back.

    *Prime Paint Color for $8.95 ea.

    *Prime Paint Color for $19.95 ea.

    *Need a Top Coat of Paint of White to Finish?

    *Top Coat Paint for $8.95 ea.

    *Top Coat Paint for $19.95 ea.

    *Paint Finish/Sheen for Top Coat Paint

    Any Notes/Questions/Comments/Concerns?

    *Any Notes/Questions/Comments/Concerns?

    Optional Photo Upload Pt. 1

    Optional Photo Upload Pt. 1


    Ready To Checkout?

    Once You Click "Add to Cart", Scroll Back to the Shopping Cart Icon at the Top & Select "CHECKOUT"

If You Don't See Your Size Listed Here

Fill out our quote form, and we will get you a personalized quote within 1 business day. All quote requests are typically answered SAME DAY!

If you are unsure of your wood species, vent fit options, etc. there is a section at the bottom you can attach any notes or upload photos regarding your needs.

Our staff will walk you through each step! Remember ALL SIZES go by DUCT OPENING size, as your vent will have to nest/fit within this opening.

More Detailed Information Can Be Found In Our Learning Center:

 

How Do I Order?

Let's begin with your DUCT OPENING SIZE!  This measurement tells us the size to nest into your duct opening for a secured fit, as well as the air flow size.

All sizes are ordered by the DUCT OPENING OR CUT OUT SIZE! Your Overall size will change depending on your chosen fit.

If you don't see your size listed under Standard Sizes, Click Here to Request a Quote.

To Be Sure Of Accuracy...Don't Forget...We Want To Measure Twice!

What's My Overall Size?

Your Overall size will be determined by your chosen fit option.

Our Standard Overall Size is as Follows:

  • Self-Rimming will have a 7/8" lip on each of the 4 sides, and rest proud of surface.

          For a 4 x 10" duct opening size, your Overall Size will be 5.75 x 11.75"

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

  • Surface / Flush Mount will have a 1/2" solid border on each of the 4 sides with straight edges, resting flush within your surface. Check your surface thickness at the time you place the order, as we make it the thickness you request.

          For a 4 x 10" duct opening size, your Overall size will be 5 x 11".

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

How Do I Select My Options?

  • First you will need to choose your wood. If you are matching to existing wood, you will want to choose that same wood so that the grain and stain appear similarly. If you do not know your wood species, that is okay too, just attach a photo or email us and we will help you find your wood species or the closest match.

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

This is due to the vent needing to match with your surrounding location.

  • After determining your Duct Opening Size and any Overall Size Allowance, you will need to choose your fit. Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that's smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

What's the difference in Vent FIT Options?

- Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that’s smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

-Our Surface / Flush Mount will have straight edges and made to the thickness of your surface, with a 1/2" solid border on all 4 sides. Typically if your area was not already cut for this particular fit, you need a handy person to help you install. Modern day tools have made it much easier for the average person to be able to install these fits. We can walk you or your contractor through this installation process. Just send us a photo or contact us with your specific location fit information and we will help.

If you have any special fit issues such as Asymmetrical or against any obstruction such as a floor, door, molding, etc. we often accommodate these unique sizes. Just contact us through our Quote Page or directly with your situational needs.

Air Flow Concerns?

If you have ventilation or air flow concerns for this location, you will need to have your HVAC technician CONVERT your CFM's into FREE AIR AREA! If you can provide us with your Free Air Area needed and prefered design we can assist you in finding/designing a piece that most closely matches your needs. This would be a specialized need and we will need you to contact us through our Quote Page or directly to best assist you.

What is my Wood Species Type?

If you don't know your wood species, and you are Staining to match your existing wood, we are happy to help you determine your wood match. Simply select any wood on our chart, and add in the Notes & Photo Upload Option a Photo of the wood you are trying to match, and one of our representatives will assist with finding the match or closest match possible. Remember, we will need to make sure the wood grain matches, to help the stain absorb in a similar way.

Paintable Woods?

If you will be painting this vent to blend with your ceramic tile or marble flooring, you will want to choose from Birch, Maple, Pine or Poplar. Birch is the best as it is strong with tight pores and most resistant to humidity or temperature changes.

 

What Stain Color do I need?

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

This is due to the vent needing to match with your surrounding location.

We use any of the Minwax Oil Based Stains. These colors can also be found at your local hardware stores. If you like, you can also mail a small sample of the wood you are matching for us to use as a stain match.

Still Unsure of Anything?

If you are unsure of anything, rest assured we have an added Notes and 2 Optional Photo Upload sections at the end of your quote request. This allows you to communicate things regarding your fit, location, etc. One of our representatives will review your notes, and address them in your quote if needed.