Select Page

Wall & Ceiling Vents

From: $38.90

Thousands of ways to customize your new wood vents!

Regardless of which size standard wood vent you choose, you can customize for a perfect match, fit and design!

  • 5 Unique Vent Designs
  • Laser Designs Available
  • Custom Fit Designs
  • 28 Unique Species of Wood
  • 27 Unique Color Wood Stains
  • 5 Unique Sheen Finishes

Each Vent Purchased is Made to Order, Specifically for YOU, According to the Specifications You Give US!

*Visit our Description box below for help before ordering, if you need help on how to order the correct size and fit, or visit our Learning Center.*

 

If you don’t see your size listed under Standard Size options, visit our Quote Request Center Here.

 


  •  

    Each Vent is Made Just For You!

    For more information about our vents, see our Description box at the bottom of this page.


    Now, Let's Get Started Crafting Your Wood Vent!


    *Select HVAC Type

    *Are You Painting or Staining this Vent?

    *Choose Stainable Wood Option

    *Choose Paintable Wood Option

    Birch is the best paintable wood as it is the most resistant to temperature changes and humidity.


    *Choose Fit of Vent

    Click Here to Learn About Fit Options

    The Self-Rimming (surface mount / drop in) will have a 7/8" lip or flange on each of  the 4 sides, covering any rough openings. If you need a larger overall size, visit our quote center. In this fit no handy person is needed as it mounts atop of surface. A 4 x 10" duct opening size, will give you an Overall size of 5.75 x 11.75" for this specific fit.

    The Surface Flush Mount will rest flush within your surface and have a 1/2" solid border on each side. For larger borders visit our quote center. These fits typically need a handy person to install if your area is not setup for this. A 4 x 10" duct opening size, will have an Overall size of 5 x 11".

    *Surface Thickness

    This tells us the thickness you need for your vent to be flush with your surface. Standard thickness is 3/4". For all specialized thicknesses add $ 3.00 each.

    *Need Countersink Screw Holes?

    These are pre-drilled holes that allow your screw to install flush to your vent.


    *Vent Design / Style for Supply

     

     

    Click Here to Learn More About Design Options

    • REGISTER STYLE (will diffuse the air in 2 directions)
    • GRATE STYLE (eggcrate, nautical hatching, square grid pattern that maximizes air flow)
    • LINEAR STYLE (linear slats are parallel to the long dimension, straight up without angle)
    • SHAKER STYLE (linear slats are parallel to the short dimension, straight up without angle)
    • Louver Style (louvers are slanted down, hiding direct view of opening)

    *Vent Design / Style for your Return

    Click Here to Learn More About Design Options

    • REGISTER STYLE (will diffuse the air in 2 directions)
    • GRATE STYLE (eggcrate, nautical hatching, square grid pattern that maximizes air flow)
    • LINEAR STYLE (linear slats are parallel to the long dimension, straight up without angle)
    • SHAKER STYLE (linear slats are parallel to the short dimension, straight up without angle)
    • Louver Style (louvers are slanted down, hiding direct view of opening)
    • PLANTATION SHUTTER LOUVER STYLE (wider louvers are up to 2" depth)


    This is the cutout or sheet metal area of your duct work. This measurement tells us the size the back of your vent must nest within, as well as your air flow size.

    Not to be confused with overall size. Per industry standards ALL Sizes are ordered by Duct Opening Sizes.

    *Select Your Duct Opening Size of Your Stainable Vent


    *Need Us To Stain This For You?

    If you need us to stain this piece for you, we will use any of the Minwax Oil Based Stains with a 4 way sprayer to get into all those little crevices, with 2 coats front and 1 coat back.

    *Need Us To Stain This For You?

    If you need us to stain this piece for you, we will use any of the Minwax Oil Based Stains with a 4 way sprayer to get into all those little crevices, with 2 coats front and 1 coat back.

     

    *Minwax Oil Based Stain Color

    *Minwax Oil Based Stain Color

    *Finish Type


    *Select Your Duct Opening Size of Your Paintable Vent

    *Need Us To Prime Paint This For You at $8.95 ea. ?

    *Need Us To Prime Paint This For You at $19.95 ea. ?

    *Prime Paint Color


    *Need a Top Coat Paint of White?

    *Select Top Coat Paint Color

    Do you need us to add a TOP COAT PAINT of White?

    *Need Top Coat Painting?

    Do you need us to add a TOP COAT PAINT of White?

    *Top Coat Paint Finish


    *Location of Vent

    If your vent is located between your base molding, typically you will need a Surface Flush Mount to properly fit. You can add photos and notes at the end, if you are in doubt and need assistance.


    *Need a Damper for $6.95 ea. ?

    *Need a Damper for $12.95 ea. ?

    *Need a Damper for $14.95 ea. ?

    *Need a Damper for $16.95 ea. ?

    *Need a Damper for $19.95 ea. ?


    *Would You Like To Add An Air Filter Assembly Package?

    If you have an Air Filter BEHIND your grille, you may prefer to add the Air Filter Package where we add filter brackets, frame, hinge and clasp, so you can easily change your filter. If you want your hinges in a certain location, be sure to mention which side you need it on, in your notes at the end.

    Click Here to Learn More

    *Tell Us Your Air Filter Size


    *Do You Have Any Questions or Comments?

    *Tell Us Here Any Notes / Questions / Concerns

    Photo Upload Option Part 1

    Photo Upload Option Part 2


    Ready To Checkout?

    Once You Click "Add to Cart", Scroll Back to the Shopping Cart Icon at the Top & Select "CHECKOUT"

     

If You Don't See Your Size Listed Here

Fill out our quote form, and we will get you a personalized quote within 1 business day. All quote requests are typically answered SAME DAY!

If you are unsure of your wood species, vent fit options, etc. there is a section at the bottom you can attach any notes or upload photos regarding your needs.

Our staff will walk you through each step! Remember ALL SIZES go by DUCT OPENING size, as your vent will have to nest/fit within this opening.

More Detailed Information Can Be Found In Our Learning Center:

How Do I Order?

Let's start with the Duct Opening Size. This measurement tells us the size to nest into your duct opening for a secured fit, as well as the air flow size.

All sizes are ordered by the DUCT OPENING OR CUT OUT SIZE! Your Overall size will change depending on your chosen fit.

What’s My Overall Size?

Your Overall size will vary upon your vent FIT selection. Our Standard Overall Size is as Follows:

  • Self-Rimming will have a 7/8″ lip on each of the 4 sides, and rest proud of surface.

For a 4 x 10″ duct opening size, your Overall Size will be 5.75 x 11.75″

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

  • Surface / Flush Mount will have a 1/2″ solid border on each of the 4 sides with straight edges, resting flush within your surface. Check your surface thickness at the time you place the order, as we make it the thickness you request.

   For a 4 x 10″ duct opening size, your Overall size will be 5 x 11″.

If you need a different Overall size or Duct Opening Size, etc. you can contact us for a Custom Order.

How Do I Select My Options?

  • First you will need to choose your wood. If you are matching to existing wood, you will want to choose that same wood so that the grain and stain appear similarly. If you do not know your wood species, that is okay too, just attach a photo or email us and we will help you find your wood species or the closest match.

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

This is due to the vent needing to match with your surrounding location.

  • After determining your Duct Opening Size and any Overall Size Allowance, you will need to choose your fit. Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that’s smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

What's the difference in Vent FIT Options?

 

- Our Self-Rimming fit has rounded leading edges (i.e. lip/flange that’s smoothly rounded and can hide any rough cut or imperfections around your opening), this is also referred to as a Surface Mount / Drop In fit. Any Handy or Non-Handy person can install this particular fit.

-Our Surface / Flush Mount will have straight edges and made to the thickness of your surface, with a 1/2″ solid border on all 4 sides. Typically if your area was not already cut for this particular fit, you need a handy person to help you install. Modern day tools have made it much easier for the average person to be able to install these fits. We can walk you or your contractor through this installation process. Just send us a photo or contact us with your specific location fit information and we will help.

If you have any special fit issues such as Asymmetrical or against any obstruction such as a floor, door, molding, etc. we often accommodate these unique sizes. Just contact us through our Quote Page or directly with your situational needs.

Air Flow Concerns?

If you have ventilation or air flow concerns for this location, you will need to have your HVAC technician CONVERT your CFM’s into FREE AIR AREA! If you can provide us with your Free Air Area needed and prefered design we can assist you in finding/designing a piece that most closely matches your needs. This would be a specialized need and we will need you to contact us through our Quote Page or directly to best assist you.

 

What is my Wood Species Type?

If you don't know your wood species, and you are Staining to match your existing wood, we are happy to help you determine your wood match. Simply select any wood on our chart, and add in the Notes & Photo Upload Option a Photo of the wood you are trying to match, and one of our representatives will assist with finding the match or closest match possible. Remember, we will need to make sure the wood grain matches, to help the stain absorb in a similar way.

Paintable Woods?

If you will be painting this vent to blend with your ceramic tile or marble flooring, you will want to choose from Birch, Maple, Pine or Poplar. Birch is the best as it is strong with tight pores and most resistant to humidity or temperature changes.

 

What Stain Color do I need?

ALL VENTS ARE SHIPPED UNFINISHED UNLESS YOU SELECT THE PAINT OR STAIN SERVICE OPTIONS.

This is due to the vent needing to match with your surrounding location.

We use any of the Minwax Oil Based Stains. These colors can also be found at your local hardware stores. If you like, you can also mail a small sample of the wood you are matching for us to use as a stain match.

What is a Damper?

For SUPPLY vents, Dampers will have blades that open and close on the BACK of your vent, for you to control the air flow by opening or closing. For solid wood vents many of our professional customers choose not to use dampers.This is an optional add-on for your supply vent of select sizes only.

What options are available for Air Returns with Filters?

If you have a filter behind the grille of your vent, you can tell us the size of your 1 or 2" air filter size (ex. 20 x 20 x 1"). We can add filter brackets to the back of your wood grille to hold your filter in place.

For ease of use, you can add the Filter Assembly Package which allows your vent to open more like a door to access your filter for changes. Here we will add a Frame, Hinge, & Clasp to your vent.

We will use a plastic clasp so your wood is not scratched as you move it each month for filter changes. If you prefer the hinges to be on a certain side, please specifiy which side (width or height) you would like them placed. Typically we put the hinges are installed on the bottom width side.

Still Unsure of Anything?

If you are unsure of anything, rest assured we have an added Notes and 2 Optional Photo Upload sections at the end of your quote request. This allows you to communicate things regarding your fit, location, etc. One of our representatives will review your notes, and address them in your quote if needed.